Oilless Air Compressor

The new Makita MAC2400 - Twin Stack air compressor by Makita is blowing away the competition. With built-in features such as a super quiet motor that draws only 12.3 amps to operate, a lower 1720 RPM rating and a heavy duty Intake Air Filter system like no other, its easy to see how this unit will out last and outperform everyone else.

The exclusive finned discharge tubing increases heat dissipation while reducing moisture in the lines and the easily removable cast iron cylinder reduces wear for increased pump life.

The Makita MAC2400 is engineered for low noise, high output and less maintenance, and delivers industrial power and results with improved durability under tough job site conditions.

The Makita MAC2400 is powered by a 2.5 HP motor. The Makita Big Bore engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise.

The Makita MAC2400 runs cooler and at half the RPM of most competitive units, resulting in greater motor and pump life and lower noise. The 4.2 gallon twin-stacked tank sustains an operating pressure of 130 PSI, and delivers 40PSI (4.8 CFM) and 90 PSI (4.2 CFM), enough for two nailers. The low AMP draw reduces instances of tripped breakers and voltage drop that can cause premature motor failure.

The Makita MAC2400 is readily available on amazon over 42% discount to the retail price.

Click this link to take the fantastic limited time discount offer!

This compressor just purrs. People are amazed when it’s running. Big rubber feet also help prevent transmitting vibration to whatever it’s sitting on, so no more vibrating boards.

These are Some of the great features of Makita MAC2400 :

• Oil lubricated: Cooler running pump, minimizes wear
• Durable cast iron cylinder reduces wear and increases pump life; removable for easy maintenance
• Built-in thermal overload for additional motor protection
• Large automotive style industrial air filter for increased air intake and greater efficiency
• One-year manufacturer’s warranty

Quiet enough to work next to and doesn’t vibrate a lot.Produces more than enough cfm for multiple nailers and short sessions with high cfm tools. You probably won’t be painting a car with this, though.Cage design really protects most of the components.Gauges on the front panel are easy to read and regulator is easy to adjust.

Overall, if you are looking for a great quality compressor with decent portability, definitely consider this Makita MAC2400 as the one!

What owners of the Makita Mac2400 had to say about it?
Here is the one :

The compressor is just as quiet as others report. I have it in the corner of my workshop about 10 from me. The start up instructions are easy and you are up and running in 20 minutes.The compressor seems to live up to its specs. I have easily run 3/8 and 1/2 inch impact wrenches, a brad gun and a finish nail gun, along with blow guns, etc.I wanted a quality tool and one that could live in the shop next to me. The Makita Mac2400 does both in spades.(P.Rudy,Colorado,USA)

Shortened review – Click here for reading the full review

Capable of delivering 20 to 44 drives per minute, depending on the tool and application, the Senco PC1010 features a direct drive motor/pump that provides extra-efficient operation for a variety of jobs. And the pump is lube-free, which means you won’t have to worry about the mess and disposal issues involved with working with oil. An aluminum cylinder offers reliable durability.

Weighing in at just 20 pounds, the Senco PC1010 is easy to carry from site to site as you work. And because it measures a compact 12.5 x 10.3 x 14 inches (WxHxD), it’s ideal for jobs with limited work space. A cushioned handle grip makes it comfortable to carry and hold, and its compact size also means it won’t take up too much room in your shop.

Significantly quieter than pancake compressors, the Senco PC1010 makes very little noise while running, so you won’t have to worry about disturbing neighbors or waking napping babies while completing in-house jobs. And its rubber-covered feet won’t scratch hardwood floors, so you can feel comfortable using it in your home.

Designed especially for finish and trim work as well as a variety of crafts and hobbies, the Senco PC1010 Compressor is a lightweight and ultra-quiet choice. This 1 HP compressor offers high performance in a compact, portable package and provides ample pressure for a wide range of small to medium jobs that require the use of pneumatic tools.

Senco PC1010 is readily available on amazon over 19% discount to the retail price. Click this link to take the fantastic limited time discount offer!

Very low noise as compressors go, and neat little rubber suction feet that keep it from skidding around and marring up a nice floor.

These are Some of the great features of Senco PC1010 :

• Is easily portable at just 20 pounds.
• Delivers 20 to 44 drives per minute.
• Offers durability thanks to an aluminum cylinder.

This model based on web search results showing it to be the quietest (69dB) small (1 CFM) air compressor on the market, and generally high satisfaction of other owners. It is indeed very quiet, well made, and lightweight.

What owners of the Senco PC1010 had to say about it?
Here is the one :

I’ve grown fond of this little Senco PC1010 WHEN IT IS USED PROPERLY! That means if I have a small trim project or a VERY small framing project it does the job, and both takes up less room and is a lot easier to pack around. It’ll drive 3″ framing nails no problem… Bob Hagen “tool hound” (Seattle, WA USA)
Shortened review – Click here for reading the full review

This 3.5HP (peak), 4.5 gallon, oil-free contractor style compressor is packed with features. It starts with the oil-free pump which is designed for durability and long use. It also packs 150 PSI in the tank for longer tool run time.

The high-flow air regulator and two-port removable console are winning combinations for contractors. Having the ability to remove the console gives the user the opportunity to remote air regulation and gain higher air pressure closer to the job site. The full roll cage frame adds protection for the pump and motor. Include mobility kit for increased portability on the jobsite.

Porter-Cable’s solved the compressor mobility problem on two levels with this tool. First, and most impressively, it’s got a two-port removable console for remote air regulation and higher air pressure right where you’re working. And the compressor itself has wheels and an extension handle, making life easier on you.

Its 4-1/2-gallon storage capacity air tank supports heavy use of brad nailers, staplers, and finish/roofing/framing nailers, and a higher 120 PSI cut-in pressure provides 30 PSI of bonus air before a 90 PSI rated air tool becomes inoperable. Other features include a 1.7 running HP, a Two-pole 3450 RPM capacitor start induction motor for maximum air delivery, an oil-free pump design for maintenance-free durability, and a full roll cage frame for pump and motor protection.

With a 2-port removable console to allow remote air regulation and higher air pressure closer to the job site, this wheeled compressor comes with two gauges, two quick-connect couplers, and weighs 85 pounds.

Porter Cable C3151 is readily available on amazon over 38% discount to the retail price.

Click this link to take the fantastic limited time discount offer!

This compressor will run all pneumatic nailers, impact wrenches and sprayers,the wheels – it makes it really nice to move around. Its really small for the amount of air it can produce.
These are Some of the great features of Porter Cable C3151 :

• 150 psi max tank pressure stores more air in the tank for longer tool runtimes
• Higher 120 psi cut-in pressure provides 30 psi of bonus air before a 90 psi rated air tool becomes inoperable
• 4.5 gal storage capacity air tank supports heavy use of brad nailers, staplers, and finish nailers; moderate use   of    roofing and framing nailers
• 1.7 Running HP, Two-pole, 3450 rpm capacitor start induction motor for maximum air delivery
• Oil-free pump for oil spills/contamination and maintenance-free operation; Full roll cage frame for pump and motor protection

This machine is solidly built, well designed, and powerful. The big air filled tires and pull out handle make it easy to move around. It’ll put out as much as 150psi, but running it at only 120 (the limit of my Porter Cable clipped head framing gun) it counter sinks nails into 4″ of the old lumber, no problem.

What owners of the Porter Cable C3151  had to say about it?
Here is the one :

I bought this compressor as a factory reconditioned unit a year ago for $188. It has exceeded my expectations. It is hard to find compressor with that much hp and CFM at that price. It is a heavy tool but that is expected given the nature. The wheels and handle make the weight very manageable. I particularly like the `quick’ valve for draining the tank….makes things much easier!
Griffin D. Buchanan (Charlestown, MA)

Shortened review – Click here for reading the full review